Back

Mathey Dearman MagnaCut XM

Mathey Dearman MagnaCut XM
  • Click to enlarge
  • Click to enlarge

$9,540.01 $7,441.21

Login to view price

This product is currently out of stock

Estimated Lead Time: 2 weeks

Sorry, the combination you have chosen is not available


Product Information
Specification

Mathey Dearman's revolutionary MagnaCut XM enables the welder and pipefitter to cut, bevel, and even weld steel pipe and steel plate without having to secure the machine to the work surface by means of chains, clamps, or any other device. Generating 300 pounds of magnetic force, powerful rare earth magnets in the wheels secure the MagnaCut XM to pipe and plate with a coating of up to 0.015" (.4mm) thick.

Each weld or cut is controlled remotely by the handheld motor control box, keeping the operator a safe distance away and allowing the MagnaCut XM to work in hard-to-reach locations such as overhead and on vertical pipes. The MagnaCut XM works with all standard torches including oxy-fuel and plasma, cutting materials with wall thicknesses up to 3" (76 mm) and tracking perfectly straight on steel plate when used with a 1" x 1" x 1/8" (25mm x 25mm x 3mm) angle iron as a guide track.

Welding with the MagnaCut XM, many companies have gained a decisive advantage by using the MagnaCut XM as a tractor for a machine welding torch for long tedious horizontal stringer welds. Many fabricators are using the MagnaCut XM in conjunction with a Bernard Machine Welding Torch or Tweeco TAM Welding Torch - these torches fit directly into the 1-3/8" (35 mm) torch holder supplied with the MagnaCut XM. With its precise variable-speed drive, the MagnaCut XM can create perfect welds on a wide variety of surfaces and material thicknesses.

Features

  • MINIMUM SET-UP TIME | Just set the distance between the torch tip and the work surface
  • VERSATILE | Cuts pipe, plate, walls and overheads
  • SAFE | Speed and direction of both machine and torch arm speed are remotely controlled
  • AMAZING HOLDING POWER | Strong rare-earth magnets hold fast to any magnetic receptive surface with coating up to .015" (.4mm) thick.
  • FAST | Up to 80% faster than cutting by hand.

MagnaCut XM kit includes:

  • Base Machine
  • Motor Control Box
  • Electric Torch Arm
  • Torch Holder
  • Torch Support
  • Hose Support
  • 74" (1880 mm) long Safety Strap for up to 24" (610 mm) pipe
  • Two (2) Snap Hooks
  • Protective Leather Cable Sleeve
  • Service Keys
  • Storage Box
  • Parts and Operating Manual

Specifications

Magnetic Pull per Wheel Assembly 150 lbs (68 kg)
Maximum Pipe Coating Thickness 0.015" (0.4 mm)
Cutting Range (Pipe O.D.) 6-5/8" (168 mm) and larger
Cutting Range (Pipe I.D.) 24" (610 mm) and larger
Vertical Cutting Capability Pipe or Plate
Horizontal Cutting Capability Pipe or Plate
Diagonal Cutting Capability Plate only
Miter or Saddle Cutting Capability Shallow miters or saddles only
Minimum Speed 2" (51 mm) per minute
Maximum Speed 40" (1016 mm) per minute
Electrical Requirement 115 VAC (230 VAC with transformer)

WARNING: THE FOLLOWING MAY VOID WARRANTY

  • The MagnaCut XM should not be used on heavy wall pipe or plate thicker than 3" (76mm).
  • The MagnaCut XM is not designed for use with 1 3/4" (44mm) or 2 ½" (64mm) barrel Plasma torches.
  • ALWAYS SECURE the machine to the pipe with a safety strap.
  • Mathey Dearman should be contacted prior to attempting any application not listed in the catalog.
  • MagnaCut XM is not designed for cutting spiral welded pipe.
  • Persons wearing a pacemaker should not come in contact with this equipment.
Product Code 05.0550.000XM
Manufacturer Mathey Dearman
Stock Level
Condition New
Shipping Weight 60lb
Shipping Dimensions 25.000 x 20.000 x 9.000 in

This field is required.
Top