Greenlee EK425L Gator Battery Powered Powered Crimping Tool

The EK425L is operated with one hand, leaving the other hand free to position the cable and connector
The crimping jaws open wide to fit easily over connectors
To help prepare for a crimp, the jaws can be jogged closed until they just grip the connector, allowing the operator to position the cable in the connector before finishing the crimp
The EK425L will complete about 325 crimps per battery charge on 4/0 AWG splices
When a crimp is fully completed, the EK425L signals the operator by automatically opening the jaws
It is then ready to make the next crimp and, when the crimping jaws need to be opened before a crimp is complete, the operator can simply push a button on the back side of the tool
Intelligent Crimping System Technology includes a pressure sensor that monitors the crimping force of each crimp and provides the operator a visual and audible alert if the force is below specifications

Accessory : CJXPJ Crimping Jaw With Nicopress X, P, And J Die Grooves, CJB Cutting Jaw For One-Time Disposable Lock Hasps, CJ22 Crimping Jaw For Use With KC22 And KA22 Crimping Dies, KD6-27 W Style Cutter Dies For ACSR To 4/0 AWG, F020735 Kearney D Crimping Die
Battery : 18 V, 3.0 AMP-HR Lithium-Ion
Battery Charger : 120 V
Battery Charge Time : 30 Minutes
Crimp Cycle Time : Approximately 4 Seconds
Crimping Capacity : Connector 10-1/0 AWG 5/8 IN Service Entrance Connectors, 1/0-4/0 AWG 0.840 Service Entrance Connectors, 6 - 4/0 AWG Aluminum H Taps, 10-2 AWG Copper H Taps, 6-2/0 AWG Copper Tension Splices, 6-4/0 AWG All Aluminum Tension Splices, 4-1/0 AWG One Piece ACSR
Crimping Force : 6.000 TON (54.000 KN)
Estimated Cycles per Charge : Approximately 325
Handle Type : Cushioned Grip Ergonomic
Jaw : CJD3BG
Length With Jaws : 18-1/2 IN (470.000 MM)
Replacement Part : CJD3O Crimping Jaw Unit-D3 And O Die Grooves, CJD3BG Crimping Jaw Unit-D3 And BG Die Grooves, CJK Crimping Jaw Unit For Kearney O Dies, CJD3 Crimping Jaw With Single D3 Die Groove, 52176 18 V 3.0 AMP-HR Li-Ion Battery, CP1 Tool Pouch
Sub Brand : Gator
Weight With Jaws : 6.800 LB (3.000 KG)
Width Head Open : 4.000 IN (108.000 MM)